A SaluSpa is a soft and inflatable hot tub. It is entertaining and comfortable, yet it may have a small hole or a piercing. This issue causes the air or water to leak and now your spa will not be good anymore. The better part is that you can repair it yourself. You do not have to call a repairman at all times. We will show you in this guide how to patch a SaluSpa in an extremely easy manner. You are not good at fixing things but you can do so.
Why Do Holes Occur in a SaluSpa?
Your SaluSpa is composed of material of strength, yet it can be damaged. Here are some common reasons:
- Sharp objects: Stones, sticks or even small pieces of glass on the floor.
- Pets and children: Pets that have sharp nails or children playing with roughness may poke the spa.
- Clothes and jewelry: Rings, watches or even zippers can create small holes.
- Improper positioning: When the SaluSpa is placed on uneven soil, without a ground cloth, it may even rip at the bottom.
💡 Hint: It is always advisable to inflate your inflatable hot tub on a flat and smooth surface that should be clean.
Where to Find a Hole in Your SaluSpa
The puncture must be located before patching. The hole is sometimes extremely tiny and therefore not easily visible. Here are simple ways:
- Check it: Check sides, bottom, and seams of your spa.
- Listening: In the case of a large leak you might hear air escaping.
- Soapy water test (bubble test):
- Add water to a spray bottle of mix soap.
- Spray on various areas of the spa.
- When you get bubbles, that is the hole.
- Mark the spot: Have a marker or tape that marks the puncture area.
This is a crucial step to be undertaken since you cannot patch the spa without locating the exact hole.
Patching Requirements
You will require some tools in order to fix the puncture. The majority of them are inexpensive and readily available:
- Repair patch (included with the spa kit or available in the shop)
- PVC glue (unless your patch is sticky)
- Towel or cloth (to dry and/or clean the area)
- Scissors (to cut the patch into shape)
- Soapy water spray bottle (to be tested)
How to Patch a SaluSpa in Steps
1. Drain and Dry
First, empty the water in the SaluSpa. Ensure that the surrounding of the hole is clean and completely dry. The patch will not stick on a wet surface.
2. Locate the Hole
Check with the bubble test and verify puncture. Double-check the marked spot.
3. Cut the Patch
Cut the patch of repair into circular form. Round patches are more adhesive in the sense that they do not peel at corners.
4. Apply Glue (if needed)
You do not need a glue in case you have a self-sticking patch. However, when using a standard PVC patch, put a layer of PVC glue on the patch and the spa surface on a thin layer.
5. Place the Patch
Tape the patch on the hole. Push it down with fingers or a square object. Improve any bubbles or folds.
6. Wait Before Using
Let the patch dry. In case you were using glue, then wait 12-24 hours. When using a self-adhesive patch wait no less than 30 minutes.
7. Refill and Test
Again fill your SaluSpa with air/water. To test that the leak has disappeared, use the soapy water test. You won’t see any bubbles, and that means your spa is fixed!
Common Mistakes to Avoid
Numerous individuals attempt to repair their SaluSpa but do minor mistakes. Here are some to avoid:
- Do not patch on a wet surface. The patch will not stick.
- Do not use wrong glue. Always apply PVC glue that is used in inflatables.
- Do not rush. Wait till it is time to use the spa again.
- Do not use very small patches. Bigger patches cover better.
How to Prevent Future Holes
It is good to fix holes but it is even better to prevent them. Here are easy tips:
- A ground cloth or mat must always be placed under your SaluSpa.
- Avoid sharp objects, bushes and glass.
- Ask children to be cautious in playing around the spa.
- Wear no rings, watches or clothes with zippers in the hot tub.
- Always test the soapiness of your spa with the soapy water test.
Frequently Asked Questions Patching a SaluSpa
1. Will duct tape fix my SaluSpa?
Duct tape is a short time solution. It will not last long. Use a good repair patch all the time.
2. How long does a patch last?
When properly applied, a patch may be years long.
3. Do I need professional help?
No, you can do little punctures by yourself. However, when the tear is quite large, a professional or a part replacement may be required.
4. Which is the best glue to use in SaluSpa repair?
PVC fastener designed to inflate pools and spas is the most effective.
5. Is it possible to patch both indoors and out?
Yes. If the hole is large, you can sew around both sides in order to make it stronger.
Conclusion
Being punctured in your SaluSpa may seem like a huge issue, but it is not. It can be fixed at home (with a bit of patience). To begin with, locate a hole, and then wash and dry that area. Apply a patch and PVC glue. Make sure you squeeze it and rest before refilling your spa. These steps will allow you to know how to patch a SaluSpa now.
Keep in mind that prevention is a factor as well. Store sharp objects out of your spa, wear a ground cloth, and inspect. In this manner, your SaluSpa will remain robust and you can relax under hot water without any complications.
