How to Drain Your SaluSpa- A Comprehensive Guide

If you have a SaluSpa, you know about the enjoyment of having a hot tub experience conveniently available right in your own backyard. The brand of inflatable hot tubs, SaluSpa provides an inexpensive, convenient way to enjoy the luxury that is a hot tub. Of course, like all hot tubs, it needs regular periodic maintenance for longevity, hygiene, and the best performance.

Draining your SaluSpa belongs to one of the most important activities of care. Be it for keeping during off-seasons or changing the water for better hygiene, draining your SaluSpa is an imperative process. This article shares with you how to go about draining your SaluSpa and when and why you should drain a hot tub, besides sharing maintenance tips that will help keep your inflatable spa at its best.

Why Should You Drain Your SaluSpa?

Draining your SaluSpa is an important maintenance task for several reasons:

1. Water Replacement: Over time, the water in your spa gets filled with minerals and oils plus other things that come off bathers. Even though you add chemicals, the water can go bad and not stay fresh. Draining then filling up the spa will help you get clean clear water back again that is good for bathing.
2. Cleaning and Maintenance: Cleaning is facilitated by draining the inflatable spa since it will now be easy to access its interior surfaces, that is, the walls and the floor. This process also gives a chance for an inspection and cleaning of the filters and heater units.
3. Preventing Stagnation: If you’re not using the SaluSpa for a while, it’s best to drain it instead of letting the water stagnate, which could develop bacteria or algae in it. And less chance of finding mold or mildew in that inflatable tub.
4. Winterizing: Inhabitants of colder climates should make sure to drain the SaluSpa before they try to winterize it so that no freezing water will cause any crack in the spas or pumps/heaters.

When Should You Drain Your SaluSpa?

Exact frequency may vary with usage, but here are some general guidelines on when you should think about draining your SaluSpa:

• Every 3 to 4 Months: For regular users, draining and refilling the water every 3 to 4 months helps ensure clean and hygienic water.
• After Heavy Use: If you’ve had a party or have been using it a lot, especially with more people, the spa may need to be drained sooner to keep the water clean.
• Before Storage: If you are storing your SaluSpa for the off-season, draining it before storing it would help prevent any potential damage and make it ready for the next season.
• When Water Quality Deteriorates: As soon as it starts turning cloudy or foamy with a funky smell even after chemical treatment being done at regular intervals, then it is time to drain the spa.

What You’ll Need to Drain Your SaluSpa

Before you begin the draining process, you’ll need to gather a few essential tools and items:

• A Drainage Hose: A long hose that will help you direct the water away from the spa and into a proper drainage location.
• A Pump or Siphon (Optional): In case your SaluSpa is located in an area where gravity drainage is not effective, you may need a pump or siphon to help remove the water.
• Towels: For drying up any remaining moisture after the draining process is complete.
• Cleaning Supplies: A mild cleaning solution or vinegar and water mix for cleaning the tub surfaces after draining.

Step-by-Step Guide to Draining Your SaluSpa

Alright, let’s get into how to drain your SaluSpa. The steps may be a little different depending on the model you have, but it’s pretty much the same in general.

Step 1: Turn Off and Disconnect All Electrical Components

Before you begin to drain, make sure that the SaluSpa is not only turned off but also unplugged from the electrical outlet. This will eliminate any possible electrical hazard while you’re draining out the water.

1. Power off the heater, pump, and air blower.
2. Disconnect the power cord from the electrical socket to ensure it’s completely turned off.

Step 2: Remove the Filter Cartridge

Remove the filter cartridge prior to draining the spa. This will help prevent any water from getting into the filtration system as you are draining the spa.

1. Open the filter compartment on the side of the SaluSpa.
2. Remove the filter cartridge carefully and set it aside for cleaning after draining.

Step 3: Locate the Drain Valve

There is a drain valve at the bottom or side of the spa͏ in ͏each S͏aluSpa model͏. This valve lets the water strictly go out of the tub. The place where the valve is, depends on your model but it is usually marked with a symbol that is very easy to notice.

1. Look for the valve on the side or bottom of the spa.
2. If your SaluSpa is placed on a flat surface or level ground, water will usually drain out through gravity flow.

Step 4: Attach a Hose to the Drain Valve

Attach a hose to the drain valve to direct water away from the spa and into any drainage area. Makes sure it doesn’t puddle around the spa and won’t ruin your yard.

1. Make sure to attach the drainage hose tightly to the valve so it doesn’t leak.
2. Unwind the hose to an appropriate area of discharge such as a storm drain, yard, or an area where the liquid can seep into the ground.

Step 5: Open the Drain Valve

Once the hose is tight, open the drain valve to let the water start draining. This will depend on how big the SaluSpa is and how high the water level reached; so it might take a while for all of the water to drain out.

1. Open the valve slowly to allow water to flow out gradually.
2. If the water is not draining properly, you may need to gently lift one side of the SaluSpa to help the water flow out, or use a siphon pump to speed up the process.

Step 6: Remove the Last Bits of Water

Once most of the water has gone, there might, therefore, be a little left in the tub. to get this out, use towels or a small hand pump to soak up that little bit of water left. While some SaluSpa models may come with a system for draining away the last bits of water, in case yours does not, make sure you have thoroughly dried up its interior so water does not accumulate.

Step 7: Clean the Spa

With the spa drained, the time has come to clean the interior. Here’s a really great chance to sterilize and clean your SaluSpa before refilling it. You should wipe the spa down with a non-abrasive cleaner and a soft cloth or sponge. Be sure to focus on places that may have accumulated dirt, oils, or algae.

1. Use a mild cleaning solution or a mixture of white vinegar and water.
2. Avoid using harsh chemicals that could damage the inflatable material.
3. Clean the filter compartment as well.

Step 8: Let the Spa Dry Completely

Before packing it away or refilling it, make sure that the interior is completely dry to avoid any growth of mold and mildew. Let the spa dry out completely in a warm, dry location.

1. Open any zippers, vents, or compartments to facilitate airflow.
2. Let the spa air dry for at least a few hours.

Step 9: Store or Refill the SaluSpa

After cleaning and drying, you have two options: store the spa or refill it with fresh water.

• For Storage: Otherwise, if you do not intend to use the SaluSpa for some time, deflate the spa with care and store it in a dry, cool place after all hoses and valves are completely drained of water.
• For Refilling:When you are ready to start using your spa again, make sure that the filter cartridge is clean and refill the tub with fresh water. Recheck the water level then reset the heating and filtering systems to their normal position.

Tips for Maintaining Your SaluSpa

Proper maintenance after draining is key to keeping your SaluSpa in top condition. Here are a few additional tips:

1. Regular Filter Cleaning: Replace the filter cartridges monthly or clean them monthly if heavily used. A clogged filter can’t work efficiently.
2. Water Chemistry: Regularly check the pH, alkalinity, and chlorine levels to ensure the water is safe and clean.
3. Cover When Not in Use: Always cover your SaluSpa when not in use to keep debris, leaves, and insects out of the water.
4. Inspect the Tub: Check the inflatable for punctures, leaks, or any wear and tear. If anything is found damaged then fix it immediately so that it does not get worse.

Conclusion

Draining your SaluSpa is essential for maintaining it in the long run, ensuring clean water and overall an enjoyable hot tub experience. Perform proper maintenance as described above along with general care, and rest assured, your inflatable hot tub can stay with you for many years to come. Whether you have cleaned it for storage, or to fill it anew, or just replaced the water, proper draining of the spa always pays you well over time; better water for your SaluSpa for a longer period of time.