Cleaning your SaluSpa is crucial for preserving a safe, enjoyable, and long-lasting inflatable hot tub. Read on in this detailed guide to find the full cleaning and maintenance instruction set. It’s important to know whether you are a new SaluSpa owner or are willing to enhance your keeping routine, as it covers all aspects starting from draining the tub to balancing chemicals.
Why Regular Cleaning & Maintenance Matters
Maintenance of your SaluSpa is not only just about cleaning it looks-a major part of preventing bacterial buildup in TDS, and unnecessary wear on the spa that shortens its life. Dirty water will lead to cloudy water, odors, and skin irritation, as well as put extra stress on components inside, such as the pump and filter.
Regular cleaning saves on repair costs and makes for a better spa experience each time you use it.
Step 1: Remove Debris & Pre-Clean the Water Surface
Before you drain it or scrub it, the very first step to cleaning your SaluSpa is to remove any visible debris. This you will do by dipping a skimmer net into the spa to capture any leaves, bugs, or any other floating debris.
Best practices:
Skim water daily if your spa is outdoors.
Ask users to shower before entry to reduce oil, lotions, and dirt in the water.
This easy step helps cut down on stuff that makes water look cloudy or smell bad.
Step 2: Drain the SaluSpa Water Completely
Now the SaluSpa should be drained. Power off, open the drain cock, and water shall flow out. A garden hose can be attached for easier draining.
Tips for effective draining:
Drain every 1 to 3 months, depending on usage.
Watch for signs like murky water or an unpleasant smell — these mean it’s time to clean.
Make sure all water is removed before you begin scrubbing.
Step 3: Clean the Liner, Cover & Pump Exterior
Once it is drained, clean both the interior and exterior with a microfiber cloth and warm water and mild detergent.
Steps to follow:
Wipe down the inside liner gently.
Clean the cover using the same solution.
Rinse thoroughly with fresh water.
Don’t use rough brushes or strong chemicals because they might ruin the material.
Step 4: Clean or Replace the Filter Cartridge
One major aspect is filter maintenance for the cleanliness of your SaluSpa’s water. Rinse filters weekly and replace them monthly; this depends on your model.
How to clean the filter:
Remove the filter and rinse under running water.
Use a soft brush if needed to remove buildup.
When to replace:
Every 3-4 weeks
If the filter is visibly discolored or damaged
Try using the ChemConnect chlorine dispenser, if your model includes it, to spread the sanitizer more evenly.
Step 5: Refill & Balance Water Chemistry
Refill the cleaned SaluSpa with fresh water up to the recommended line. Finally, balancing the water chemistry is as important as filling it up.
Check these parameters:
pH level (ideal range: 7.2 – 7.8)
Total alkalinity (80 – 120 ppm)
Monitor with a water testing kit for the levels and adjust with the appropriate spa-safe chemicals, then let the pump run at least thirty minutes after adjustments.
Step 6: Tips to Keep Your SaluSpa Water Clean Longer
To reduce the need for frequent cleaning, follow these simple tips:
Always use the cover when the spa is not in use.
Shower before entering the spa.
Limit the number of users at one time.
Clean the filter weekly.
Avoid introducing lotions, oils, or soaps.
Keeping good hygiene habits can help extend time between cleanings. It also prevents the water from getting cloudy and stops TDS from
Step 7: Deep Cleaning Schedule
Making a cleaning schedule keeps your SaluSpa fresh all year long.
Suggested Schedule:
Daily: Skim debris, cover when not in use.
Weekly: Rinse filter, test water chemistry.
Monthly: Deep clean liner, replace filter if needed.
Quarterly: Full drain and deep clean.
You can change this schedule depending on how often it’s used, how much it’s outside, and the state of the water.
If you keep facing issues that just won’t go away, here’s a way to deal with them:
Cloudy Water: Check and adjust the chemical levels. Rinse or swap out the filter, if needed. You might want to think about using
Bad Smell: Drain water and perform a deep clean. Add sanitizer as needed.
Liner Stains: Try using a gentle cleaner. Wipe away marks with a soft cloth.
Tackling these problems right away can stop any lasting harm and make sure the spa visit is enjoyable.
SaluSpa Maintenance Checklist
| Task | Frequency | Notes |
|---|---|---|
| Skim debris | Daily | Use skimmer net before each use |
| Rinse filter | Weekly | Run under warm water |
| Test water chemistry | Weekly | Use testing strips or kits |
| Deep clean liner & cover | Monthly | Use microfiber cloth + mild soap |
| Replace filter cartridge | Monthly | Check condition, replace if needed |
| Drain & refill water | Every 1–3 months | Based on usage and water clarity |
Conclusion: Enjoy a Cleaner, Safer SaluSpa
Proper cleaning of SaluSpa means you’ll always know that the water is clean and always bacteria-free, hence extending the life of your inflatable hot tub. Overall, after following these cleaning steps and taking the maintenance tips into consideration, you will be enjoying a more safe and relaxing spa. Keep a regular cleaning schedule and use gentle, spa-safe cleaners to keep your SaluSpa in great condition all year long.
From vacuuming the filter to balancing water chemistry, or wiping down the liner, regular maintenance keeps on allowing your investment to provide comfort and luxury as and when you require it.
About Author
